View BGS13AL12_4151848.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

industrial & multimarket data sheet revision 1.1, 2009-06-25 preliminary BGS13AL12 sp3t antenna switch with antenna termination port
edition 2009-06-25 published by infineon technologies ag 81726 munich, germany ? 2009 infineon technologies ag all rights reserved. legal disclaimer the information given in this docu ment shall in no event be regarded as a guarantee of conditions or characteristics. with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infine on technologies hereby disclaims any and all warranties and liabilities of any kind, including witho ut limitation, warranties of non-infrin gement of intellectua l property rights of any third party. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements, components may contain dangerous substances. for information on the types in question, please contact the nearest infineon technologies office. infineon technologies compon ents may be used in life-su pport devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safe ty or effectiveness of that de vice or system. life support devices or systems are intended to be implanted in the hu man body or to support an d/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
BGS13AL12 sp3t rf switch preliminary data sheet 3 revision 1.1, 2009-06-25 trademarks of infineon technologies ag apoxi?, bluemoon?, comneo n?, convergate?, cosic? , c166?, crossave?, canpak?, cipos?, coolmos?, coolset ?, corecontrol? , dave?, easypim?, econobridge?, econodual?, econopack? , econopim?, eicedriver?, eupe c?, fcos?, falc?, geminax?, goldmos?, hitfet?, hybr idpack?, isac?, isoface?, isopac k?, my-d?, mipaq?, modstack?, novalithic?, omnitune?, omnivia?, optiverse ?, optimos?, origa?, profet?, pro-sil?, primepack?, rasic?, reversav e?, sceptre?, serocco?, si cofi?, smarti ?, smint?, socrates?, satric?, sensonor?, sindrion?, smartlewis?, sieg et?, truentry?, tempfet?, tricore?, thinq! ?, trenchstop?, vinax?, vinetic? , x-gold?, xmm? , x-pmu?, xposys?, xway?. other trademarks amba?, arm?, multi- ice?, primecell?, realview?, thumb? of arm limited, uk. autosar? is licensed by autosar development partnership. bluetoot h? of bluetooth sig inc. cat-iq? of dect forum. colossus?, firstgps? of trimble navigation ltd. emv? of emvco, llc (visa ho ldings inc.). epcos? of epcos ag. flexgo? of mi crosoft corporation. flexray? is licensed by flexray consortium. hyperterminal? of hilgraeve incorpor ated. iec? of commission electrot echnique internationale. irda? of infrared data association corporation. iso? of international organization for standardization. matlab? of mathworks, inc. maxim? of maxim in tegrated products, inc. microtec?, nucleus? of mentor graphics corporation. mifare? of nxp. mipi? of mipi alliance, inc. mips? of mips technologies, inc., usa. murata? of murata manufacturing co. om nivision? of omnivision technologies, inc. openwave? openwave systems inc. red hat? red hat, inc. rfmd? rf micro devices, inc. sirius? of sirius sattelite radio inc. solaris? of sun micros ystems, inc. spansion? of spansion llc ltd. symbian? of symbian software limited. taiyo yuden? of ta iyo yuden co. teaklite? of ceva, inc. tektronix? of tektronix inc. toko? of toko kabushiki kaish a ta. unix? of x/open co mpany limite d. verilog?, palladium? of cadence design syst ems, inc. vlynq? of texas in struments incorporated. vxworks?, wind river? of wind river systems, i nc. zetex? of diodes zetex limited. last trademarks update 2009-05-27 BGS13AL12, sp3t antenna switch with antenna termination port revision history: 2009-06-25, revision 1.1 previous revision: 2009-05-04, revision 1.0 page subjects (major cha nges since last revision) converted to the new ifx framemaker template. 9 pin13 pin description 11,12 electrical specifications 13 application board, deembedding board 14 pin marking
BGS13AL12 sp3t rf switch table of contents preliminary data sheet 4 revision 1.1, 2009-06-25 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 list of figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 list of tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 signals description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.1 electrical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4 application board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.1 deembedding board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 package outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 table of contents
BGS13AL12 sp3t rf switch list of figures preliminary data sheet 5 revision 1.1, 2009-06-25 figure 1 functional diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 figure 2 pin configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 figure 3 application board with external parallel inductor l1 (1 5 nh) at ant port . . . . . . . . . . . . . . . . . . . . 13 figure 4 deembedding board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 5 package outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 figure 6 pin marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 figure 7 land pattern and stencil mask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 list of figures
BGS13AL12 sp3t rf switch list of tables preliminary data sheet 6 revision 1.1, 2009-06-25 table 1 pin description (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 2 truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 3 absolute maximum ra tings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 4 operating ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 5 esd ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 6 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 table 7 electrical characteristics (cont?d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 list of tables
7 2 3 9 8 4 5 6 12 11 10 1 term vdd ctrlb gnd rf2 rf1 gnd ant gnd gnd rf3 ctrla product name product type package sp3t rf switch BGS13AL12 pg-tslp-12-3 sp3t rf switch BGS13AL12 preliminary data sheet 7 revision 1.1, 2009-06-25 1 features main features: ? 3 high-linearity rx ports with pow er handling capab ility of up to 30 dbm ? antenna termination port ? no external decoupling components required ? small leadless package tslp12 ? high esd robustness ? low harmonic generation ? low insertion loss ? high port-to-port-isolation ? 0.1 to 3.0 ghz coverage ? on-chip control logic supporting logic levels from 1.4 v to 3.0 v ? lead and halogen free packa ge (rohs and weee compliant) applications ? wcdma diversity ?cdma diversity ? analog and digital tuner ? band switching
BGS13AL12 sp3t rf switch features preliminary data sheet 8 revision 1.1, 2009-06-25 description the BGS13AL12 rf mos switch is spec ifically designed for wcdma diversity applications. an additional 4th port allows proper termination of the antenna when turned off. this sp3t offers low insertion loss and high robustness against interferer signals at the antenna port, while maintaining a very small size of only 2.0 x 2.0 mm2 and a maximum height of only 0.4 mm the on-chip controller integrates cmos logic and level shifters, driven by co ntrol inputs from 1.4 to 3.0 v. unlike gaas technology, external dc blocking capacitors at t he rf ports are only required if dc voltage is applied externally. the BGS13AL12 rf switch is manufactured in infineon?s patented mos technology, offering the performance of gaas with the economy and integrati on of conventional cmos including th e inherent higher esd robustness. figure 1 functional diagram bgs 13a_functional_ diagramm.vsd rf1 rf2 ant vdd ctrl a decoder +esd rext ctrl b gnd rf3
BGS13AL12 sp3t rf switch signals description preliminary data sheet 9 revision 1.1, 2009-06-25 2 signals description figure 2 pin configuration (top view) table 1 pin description (top view) pin no. name pin type buffer type function 1gnd gnd ground 2 rf3 i/o rx rf port 3 3 term i/o ext. term port 4 rf2 i/o rx rf port 2 5gnd gnd ground 6 rf1 i/o rx rf port 1 7gnd gnd ground 8 ant i/o antenna port 9gnd gnd ground 10 vdd pwr vdd supply 11 ctrl a i control pin a 12 ctrl b i control pin b 13 nc nc for thermal reasons re commended to connect to ground table 2 truth table function ctrl a ctrl b ant rf1 h h ant rf2 l h ant rf3 h l ant term l l bgs 13a _pinout.vsd 7 2 3 9 8 4 5 6 12 11 10 1 term vdd ctrlb gnd rf2 rf1 gnd ant gnd gnd rf3 ctrla
BGS13AL12 sp3t rf switch electrical characteristics preliminary data sheet 10 revision 1.1, 2009-06-25 3 electrical characteristics esd robustness of antenna port can be increased to 8 kv iec-61000-4-2 with ex ternal protection circuit. attention: stresses above the max. values listed here may cause permanent damage to the device. exposure to absolute maximum rating conditions for extended periods may affect device reliability. maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. table 3 absolute maximum ratings parameter symbol values unit note / test condition min. typ. max. storage temperature range t stg -65 ? 150 c ? dc voltage at all pins to gnd v dc ??3.2v? max rf power at antenna port, any rf port on p ant in max ??32dbm? table 4 operating ranges parameter symbol values unit note / test condition min. typ. max. ambient temperature t a -30 ? 85 c ? rf frequency f 0.1?3ghz? control voltage low v ctrll -0.3 ? 0.3 v ? control voltage high v ctrlh 1.4 ? v dd v? supply voltage v dd 2.70 ? 3.0 v ? max. input (reverse) power at antenna pin pin ? ? 30 dbm ? table 5 esd ratings parameter symbol values unit note / test condition min. typ. max. human body-model iec 61340-3-1, all pins v max ??500v? human body-model iec 61340-3-1, antenna port v max ??1000v?
BGS13AL12 sp3t rf switch electrical characteristics preliminary data sheet 11 revision 1.1, 2009-06-25 3.1 electrical specification test conditions: ? termination port impedance: z 0 = 50 ? temperature range: t a = -30 c...+85 c ? supply voltage: v dd = 2.8 v ?p in = 15 dbm ? across operating range of control voltages: v ctrh = 1.4...2.8 v table 6 electrical characteristics parameter symbol values unit note / test condition min. typ. max. insertion loss 824 BGS13AL12 sp3t rf switch electrical characteristics preliminary data sheet 12 revision 1.1, 2009-06-25 table 7 electrical characteristics (cont?d) parameter symbol values unit note / test condition min. typ. max. input intercept point requirements - imd2 1) 1) with external parallel inductor (15 nh) at ant port tx=10 dbm@ ant port, int= -15 dbm @ant port (tx freq = 824 - 915 mhz) ? -115 -100 dbm ? tx=10 dbm@ ant port, int= -15 dbm @ant port (tx freq=1710 - 1980 mhz) ? -110 -100 dbm ? input intercept point requirements ? imd3 1) tx=10 dbm@ ant port, int= -15 dbm @ant port(tx freq = 824 - 915 mhz) ? -110 -107 dbm ? tx=10 dbm@ ant port, int= -15 dbm @ant port (tx freq=1710 - 1980 mhz) ? -110 -107 dbm ? triple beat ratio tx1=21.5 dbm, tx2=21.5 dbm, int=-30 dbm (650 mhz - 900 mhz) ?-83 ? dbc? tx1=21.5 dbm, tx2=21.5 dbm, int=-30 dbm (1710 mhz - 2155 mhz) ?-82 ? dbc? harmonic generation rf ports up to 12.75 ghz pin (umts) = 23 dbm, duty cyle = 100%, unused rf pins = any load, vswr = 4:1 ?? ? ? ? 1 ghz ? ? -46 dbm ? 2 ghz ? ? -46 dbm ? harmonic generation termination port up to 12.75 ghz pin (umts) = 30 dbm at low band, 22 dbm at high band, duty cycle = 25% ?? ? ? ? 1 ghz, second harmonic ? ? -40 dbm ? 1 ghz, all other harmonics up to 12.75ghz ? ? -46 dbm 2 ghz ? ? -44 dbm ? switching time and current consumtion on/off switching time (10-90%) rf ? ? 5 s current consumption at vdd pin ? 200 500 a? current consumption at vctrl pins ? <1 30 a?
BGS13AL12 sp3t rf switch application board preliminary data sheet 13 revision 1.1, 2009-06-25 4 application board figure 3 application board with external pa rallel inductor l1 (15 nh) at ant port 4.1 deembedding board figure 4 deembedding board bgs 13al12 _application _board .vsd vdd v1 v2 13 xxx x gnd l1 bgs 13al 12_deembedding _ board.vsd
BGS13AL12 sp3t rf switch package outlines preliminary data sheet 14 revision 1.1, 2009-06-25 5 package outlines figure 5 package outlines figure 6 pin marking package_outlines.vsd
BGS13AL12 sp3t rf switch package outlines preliminary data sheet 15 revision 1.1, 2009-06-25 figure 7 land pattern and stencil mask land_ pattern_stencil_mask.vsd
published by infineon technologies ag www.infineon.com

▲Up To Search▲

Price & Availability of BGS13AL12

	To Download BGS13AL12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .